Note: The solid state relay has been removed from the new power supply board and replaced by discrete components. The color-changing motor heats up, it stops rotating while traveling, and the color-changing power board is faulty. Replace the EF119 board. E9102 power supply board inspection CZ021, 6BPB power supply board inspection CZ1, E733 power supply board inspection CZ332, E734 embroidery machine power supply board inspection CZ342. Replace the E9505 and E721 boards.

Use the handle to rotate the color-changing motor and linkage mechanism, and observe whether the needle position indicator light changes accordingly. Replace the color-changing power supply board. Check the color-changing power supply board of the computerized embroidery machine.

E9102 power board inspection CZ021, 6BPB power board inspection CZ1, E733 power board inspection CZ332, E734 power board inspection CZ342. Replace the needle position detection board. Check E9102 power board diodes D1, D2; 6BPB power board diodes D7, D8; E733 power board diodes D3, D4; E734 power board diodes D1, D2 are damaged? Replace damaged components.

Replace the color-changing power supply board. 4 heads cap embroidery machine When using the stepper motor potentiometer to change the color, if there is a color change failure, check whether the potentiometer is damaged? Replace the potentiometer. If it does not change, or some positions are displayed and some positions are not displayed, the needle position detection board is faulty.

The color can be changed in both forward and reverse directions, but the limit is exceeded after each color change.. Check whether the connector on the pin position detection board is firmly connected, and if the contact core is damaged. The color is changed clockwise, and the color is not changed counterclockwise. Check whether the plug and core of the signal cable from the main board to the power board are damaged.

Observe whether the half-tu indicator and needle position indicator on the needle position detection board of the embroidery machine are on. Check whether the plug and core of the signal cable from the main board to the power board are damaged.

امتیاز بدهید :

If not, it is necessary to meet these requirements. Handling and repairing methods for Spray Printing Embroidery Machine Suppliers embroidering tricks in the embroidering process of the embroidery machine: 1.5 to 2 mm, and the tip of the hook must be in a straight line with the needle, and the back plane of the needle and the tip of the hook must maintain a distance of one strand of hair.

The mechanical drive parts of the embroidery frame are defective, and the shaft connected to the stepper motor is loose-adjust or replace The belt tension of the embroidery frame drive is poor or there are foreign objects on the drive track of the embroidery frame-adjust the belt tension (or clean the track).

Accessories depend on the machine.A certain machine head of a computerized embroidery machine will especially break the thread, which can be dealt with by the following process: If you pull it out and sell it as scrap, you will need to replace a lot of things if you don’t repair it. It is necessary that the lower end of the needle hole is below the tip of the hook. First touch the hook with your hands, whether there is any burr, yes, change it. See if there are burrs in the needle plate, and it is necessary to polish it with sandpaper To 4.

Hold the jumper wire A with your hand, and swing it up and down around 250 degrees to see if the cam gap is large and small, and whether the 7. The trick data is wrong, correct the trick from the beginning or input the embroidery trick from the beginning Defective stepper motor driver in X and Y direction of embroidery frame-replace the defective stepper driver If the above methods are not able to be tried, just press down the needle, hold the needle clamp with your hand, and move it up and down. The slider, the 'driver' and the aluminum connecting rod, small connecting rod, Inject butter into the Dalian rod to reduce the gap. I can think of any specific methods. 

امتیاز بدهید :

The use of the bottom thread can reduce the number of hits, if it is embroidered on densely woven fabrics. The usual density is 45. In the United Wholesale Embroidery Machine Seller Factory States, it is white, blue, and red. This is to save time and facilitate embroidery. Then we have to say what material the fabric it embroiders is made of. How many. The emergence of situations such as moving positions.

The whole version will be clearly seen, and will not be blurred. So when is the lock pin used? For example, when the stitch step is relatively long when making big letters, if the stitch is not locked at this time, the thread may fall off. In this case, you have to understand the colors used. Then the density of small letters can be about 5. Matching of colors. Whether the bottom thread of the thin needle is offset, etc.

Lock the needle when wrapping, and lock the needle before cutting the thread, so that the machine will exert a pressure or tension on the embroidery thread during embroidery, and sometimes the thread is trimmed to prevent the thread from falling off. I personally think that if flat needles can be used, other meters are not necessary. Check if there is any edging and will not show the bottom.

For example, a stamp similar to landscape, then the sky above must be blue, clouds are white, the sun is yellow, green grass and Shenzhen green The tree, the stem is brown, the flowers are red, the flying line is white geese and so on. Usually when using pins. The special needle method. I personally think that it is a very important detail in a patte, if there is a habit of locking stitches.

And the stitch step should be small, around. For example, if you play the national flag, there are many kinds of it, and there are no colors used. For plate making. And the rope around it can be processed with stitches made of some small pattes. In special circumstances, such as linen cloth, the stitch density should be denser.

If it is a small letter, a bottom line is enough. Then it must be a good habit. Don't get confused. The bottom line needs to be more. What fabric is used and what density. When we are finishing a patte. There is. In the case of rough cloth.

امتیاز بدهید :

Miao batik is an art created for the needs of the producers. The structure is rigorous, the lines are smooth, the decoration is very interesting, and it has a distinctive ethnic style. Due to the great influence of Chinese culture in the Tang Dynasty on Japan, Nara’s Shokangin has preserved various treasures of Chinese craftsmanship from the Tang Dynasty since the Tang Dynasty, including a set of wax screens, which was also a study abroad from Japan in the Tang Dynasty. Frozen, she fell asleep in contemplation without thinking of a way.

The powder of these minerals was once used to color textiles. Under this situation, these Miao ethnic communities have formed customs and cultures, such as clothing and costumes, marriage and festival etiquette, social methods, and funeral customs dominated by batik art. There is a record of 'May, start to irrigate Polygonum blue' in Xia Xiaozheng. One day, the girl looked at the bunches of flowers for a long time. Or more of them happen at the same time. Danzhai County,China Rhinestone Hot Mixed Embroidery Machines Manufacturers Anshun County, and Zhijin County are multi-ethnic communities dominated by the Miao nationality.

Therefore, the ancient batik objects unearthed are very few, which is the same as what was left by the imperial nobles after their deaths. Guo Guo. Later generations can get a glimpse of the luxurious and beautiful batik pattes in the Tang Dynasty from the clothes of the two women in the picture of the Song Huizong copy of Zhang Xuan and the clothes of several horsemen in the picture of Mrs., it must have gone through a long and difficult period. According to the characteristics of pigment and dye, adhesive and mordant are used respectively Established over-dyeing, mordant dyeing, and “grass-rock dyeing” combined techniques.

But the general trend of its occurrence and development should be: from the use of color materials, the ancients developed from the use of natural color objects (direct use of natural objects with colors) to the use of natural color objects after processing (grinding and adjustment of natural objects). India only used madder and indigo in 2500 BC, 500 years later than China. There were countless strange flowers and grasses, and the flowers were fragrant and the butterflies dance and bees were busy. 

امتیاز بدهید :

Today, I will share with you the causes and prevention methods of pilling of computerized embroidery fabrics. The color is brighter). 5. Now such products have been produced in China and have been widely used in the production of knitwear. It is not only light and comfortable to wear, but also not easy to be pilled by static electricity. The length of the fibers constituting the ya should be uniform, and its cohesive force is strong, so there is little pilling.

Any short fiber will pilling, and polyester staple fiber has the most serious pilling. Anti-pilling finishing. The temperature should also be noted,Wholesale Rhinestone Hot Mixed Embroidery Machine too low fat body solubility is not enough, too high fabric strength decreases. The singeing process will affect the inteal quality and appearance style of man-made fiber fabrics. Most of the fabrics have pilling, which affects the appearance. At present, general resins (acrylic self-crosslinking resins) can no longer meet the high requirements of customers for fabrics, because some anti-pilling agents (resins) have a hard hand feeling and a decrease in strength after treatment.

Changes occur, and some resins must be baked at high temperature. Therefore, choosing a single product containing Tencel can also have a good anti-static effect. Matching with denim items can reduce static electricity and effectively avoid hair balls.For cotton and polyester/cellulose fiber blended fabric, cellulase is used; wool or polyester/wool blended fabric is polished with suitable biological protease.

The chemical fiber has high strength and high bending resistance, which makes the fiber not easy to fall off and entangles into balls on the surface of the textile. Low twist ya fiber bundles are not tightly bound, and the woven fabric will be softer and more comfortable, but the corresponding fibers are more likely to rub against each other and entangle into balls.

The spinning process is complicated. No irritation to human skin. Add the proper amount of the catalyst magnesium chloride, dissolve and dilute it before adding it to prevent precipitation of the resin finishing agent and affect the anti-pilling effect. The fabric is fluffed first, and the fluff is gathered together to form pilling. 

امتیاز بدهید :